Philips FR999 - Manual (Page 18)

MENUS
S'
* SfILfICr IWPUT
Assigns the audio input connectors to the different source
selections chosen with SOURCE SELECT (see "Source
selection" for details).
— cqr ;; I
Digital coaxial input 1, COAX 1 IN
Digital coaxial input 2, COAX 2 IN
■OPT !
Digital optical input, OPTICAL 1 IN
-DPT О
Digital optical input, OPTICAL 2 IN
■5RT IN
Analog audio input SAT IN
■POP IN
Analog audio input VCR IN
П / T b I ±14
Analog audio input TV IN
-CIR IN
Analog audio input CDR IN
r Tl Th I ' (_ ±14
Analog audio input CD IN
-Б CM IN
Analog audio input 6 CHANNEL DVD/SA-CD IN
Setup for preset radio stations (see "TUNER" for details).
R l irn TMCTTni I
U • U ± * 4 J I ni_L.
Stores radio stations automatically
rn h i ^ ^ t CZ ^ I ---- I tniM ±IMj| I nt_|_
Stores radio stations manually
—GIPO NRNE
Allows you to assign names to stored radio stations
■PEORUrPLO
Resorts stored radio stations
TV menu
If the receiver is connected to a Philips CINEMA LINK TV via
the CINEMA LINK system control bus jacks (see
"CONNECTIONS"), you may use the TV to set up the system.
An option called RECEIVER will be added to the TV menu.
If CINEMA LINK is on, adjustments on the receiver will be
shown on the TV screen for a few seconds. Consult the
instruction booklet of your TV on how to use the TV menu.
The options offered may vary by TV model.
Switching the connection
• Press CINEMA LINK on or off to switch the connection
between the receiver and the TV.
-►If the connection is switched on, cinema link on is
displayed.
Note: We recommend switching CINEMA LINK off during
recording. This avoids unwanted interruptions due to
switching TV functions.
If CINEMA LINK is switched on and the TV menu is active,
TP NENu is displayed and the menu and sound functions on
the receiver are locked.
Activating CINEMA LINK
' Press '£!£ CINEMA GO on the remote control.
-►The TV sends a play command to the CINEMA LINK DVD
player, if present. The DVD player will start playing and the
receiver automatically switches to the best CINEMA LINK
sound.
' If no DVD player is connected or if the DVD player has no disc
loaded, the TV will send a play command to the CINEMA LINK
video recorder, if present.
-►The video recorder will start playing and the audio receiver
selects the best CINEMA LINK sound.
• If no video recorder source is connected or no tape is loaded,
the TV will select the last watched TV channel.
18