Cisco WIP300 - Manual (Page 18)

Wireless-G IP Phone
9 Chapter 3: Installing and Using the Wireless-G IP Phone
Overview
Chapter 3: Installing and Using the Wireless-G IP Phone
Overview
This chapter provides instructions for first-time installation and basic use of the IP Phone. Follow the steps below to get started. Once you have finished
configuring the phone you will be able to make and receive Internet phone calls.
Inserting and Charging the Phone’s Battery
1. Remove the battery compartment cover by sliding it downwards.
2. Insert the battery with the metal contacts facing the contacts at the bottom of the battery compartment.
3. Replace the battery cover by sliding it upwards until it clicks into place.
Proceed to the next section, “Charging the IP Phone’s Battery” on page 10.
Metal Contacts Battery