Cisco WIP300 - Manual (Page 41)

Wireless-G IP Phone
32 Chapter 4: Configuring the Wireless-G IP Phone
Roaming
Roaming
The Roaming menu allows you to set specific parameters for roaming from one wireless access point to another. Refer to table below for a list of options
available in the Roaming menu:
Profile Password
The Profile Password menu allows you to change the password used to access the Profile menu. Follow the steps below to change the Profile
menu password.
1. If necessary, press the Menu Soft Key to enter the Main menu.
2. Scroll to Profile, press the Select Soft Key, enter your password, then press the Navigation button to enter the Profile menu.
3. Scroll to Profile Password, then press the Select Soft Key.
4. Enter the old password, then press the Navigation button.
5. When you see the New Password screen, enter a new password for the Profile menu.
6. When you are finished entering the password, press the Navigation button to save it.
Option Description
Roam Metric Specify an RSSI (Received Signal Strength Indication) value to begin a roaming scan.
Roam Delta Specify the RSSI threshold for target access points to join.
NProbes Specify the number of probes per channel to send when scanning.
Active Time Specify the amount of time spent on each channel when scanning.
Home Time Specify the amount of time spent on the home channel between scans.