Cisco WIP300 - Manual (Page 37)

Wireless-G IP Phone
28 Chapter 4: Configuring the Wireless-G IP Phone
Profile
Profile
The Profile menu allows you to make changes to your SIP accounts, network profiles, roaming options, profile password, or configure your IP phone using
SecureEasySetup. Refer to the sections below for the options available in the Profile menu.
Network Profile
The Network Profile menu allows you to assign up to six wireless access points for your IP Phone to connect to. To view the details of a profile, press the
Navigation button. To edit a profile, highlight the network profile you would like to edit, then press the Option Soft Key. Refer to table below for a list of
options available in the Profile Options menu:
Note: The first time you enter the Profile menu, you will be asked to create a password. Enter a password using the numeric keypad,
then press the Navigation button to save the password. After you have created a password, you will need to enter it to access the
Profile menu.
Option Description
Edit Edit the current network profile.
Rename Change the current network profile’s name.
Delete Delete the current network profile.
Auto Detect Enable or disable the current network profile.
Move Move the current network profile up or down in the network profile list. The IP phone will try to
connect to all of the access points, in the order they appear in the network profile list, until it is able
to make a connection.