Cisco WIP300 - Manual (Page 38)

Wireless-G IP Phone
29 Chapter 4: Configuring the Wireless-G IP Phone
Editing a Network Profile
Editing a Network Profile
The Edit menu allows you to edit the currently selected network profile. Refer to the table below for a list of options available in the Edit menu:
Option Description
Preview View a summary of the current network profie.
Wireless
Settings Edit wireless network settings. Highlight Wireless Settings, then press the Select Soft Key to select
the following options:
• ESSID: Allows you to enter your wireless network’s ESSID name or perform a site survey to view
wireless networks in range of the IP Phone.
• Data Rate: Allows you to specify the data rate of your wireless network. If you don’t know the
data rate, select Auto.
• Security: Allows you to select wireless security settings to match your network.
IP Settings Select from the following IP modes:
• Fixed IP: Allows you to manually enter IP settings for your network.
• DHCP: Allows you to use DHCP to acquire IP settings for your network.
• PPPoE: Allows you to use PPPoE to acquire IP settings for your network.
Account Choice Assign a SIP account to a network profile.
NAT Settings Set STUN server options. Press the Select Soft Key to select from the following options:
• NAT Solution: Allows you to enable or disable STUN services.
• NAT Timer: Allows you to change the interval of time the phone waits between commication
sessions with the STUN server.
• STUN Address: Allows you to enter the address of the STUN server you want the phone to use.
• STUN Port: Allows you to enter the network port of the STUN.