Figure 5-5: sip screen – Cisco WIP300 User Manual
Page 53
Wireless-G IP Phone
44
Chapter 5: Using the Web-based Utility
SIP
SIP
You can use SIP to Configure or Remove the SIP Account Settings. You can assign up to six SIP accounts to your IP Phone. To view the SIP settings, select the
SIP tab. You will see the Account List. This list shows the configured accounts and which ones are active. To edit a SIP account, click on Configure. You can
add, change or edit the Internet phone service Account Name, Phone Number, Authentication ID, Authentication Password, SIP Domain, Local Port, Proxy
Address, Proxy Port, Outbound Address, Outbound Port and Register Timer (in seconds). You can also select Codec options, Pkt (Packet) Time (in milliseconds)
and the Out of Band DTMF. To remove a SIP account, click on Remove. Click on Save Settings to confirm your choices.
Figure 5-5: SIP screen