Gaggia TS - Manual (Page 25)

ENGLISH
26
8 TROUBLE SHOOTING
9 MACHINE DISMANTLING
To dismantle the machine we recommend that it is dismantled
and the parts separated according to the type of materials involved
(plastic, metal, etc). The parts separated in this way are then to be
sent to the relative specialized disposal companies.
PROBLEM CAUSE REMEDY
Machine switch off 1. Machine switch off
1. position the machine switch to position 1
2. Cable not properly connected
2. Connect power cable
No water in boiler 1. Water tank empty 1. Fill tank
2. Tank plates not inserted 2. Insert plates into tank
3. Motor driven pump not in operation 3. contact specialized personnel
No unit delivery 1. motor driven pump out of order 1. contact specialized personnel
2. unit solenoid valve out of order 2. contact specialized personnel
3. unit switch out of order 3. contact specialized personnel
Steam fails to come out of
the nozzle
1. too much water in boiler 1. see specific problem
2. damaged resistance 2. contact specialized personnel
3. clogged sprayer element 3. clean the sprayer element
4. resistance saver engaged 4. reinsert the resistance
Too much water in the boiler
1. the motor driven pump remains
engaged
1. contact specialized personnel
2. perforated exchanger 2. contact specialized personnel
3. automatic charge solenoid valve
blocked
3. contact specialized personnel
Wet coffee dregs 1. Grinding regulated too fine 1. Adjust grinding value
2. Unit still cold 2. wait for the machine to reach the
correct temperature
3. Solenoid valve fails to discharge 3. contact specialized personnel
Coffee dispensing too slow 1. grinding element set too fine 1. Adjust the grinder
2. dirty filter-holder 2. replace the filter and undertake more
frequent filter-holder cleaning
3. clogged unit 3. contact specialized personnel
4. Solenoid valve partially clogged 4. contact specialized personnel
Coffee dispensing too fast 1. grinder is regulated too large 1. regulate the grinding