Garelick 19622-61 OUT OF SIGHT UNDER PLATFORM (RETAINING STRAP) User Manual

Instructions for installing retaining strap

Advertising
background image

Garelick Mfg. Co. 644 Second Street, PO Box 8, St. Paul Park, MN 55071

Phone: 651-459-9795

FAX: 651-459-8269

www.garelick.com

12.584

INSTRUCTIONS FOR INSTALLING

RETAINING STRAP



1. Locate the 12” long, black, hook and loop strap enclosed in the box

with the ladder.

2. Pass the tip from one end of the strap through the slot in the other

end, forming a loop.

3. Slip the white poly block into the loop and cinch the loop tight around

the block. Make sure the hook and loop material will stick to itself
once the block is fastened in place. If the hook and loop does not
stick to itself, undo the loop and reverse the material and try again.

4. Position the white poly block and loop under the front edge of swim

platform, mark and drill holes to proper depth, making sure not to drill
completely through the swim platform.

5. Insert screws and tighten. You can now wrap the strap around one or

two steps and it will keep the ladder from deploying when boat is
underway.

Advertising