Giga Tent FT 052 - Manual (Page 3)

Step ''2'' attach the rainfly
Step "3" Install the awning
L
I INSIDE
J
K
16) Open the zippered flap on the fly
17)
18) Fit the pins of the awning poles into the grommets at the hem of the awning
19) Hang the rope loop over the pole pin and stake the rope down.
Tie a loop at each end of the guy robes
10) Open the rain fly and insure that it is right side up.
11) Drape the rain fly over the tent body (this will be easier with 2 people)
12) Attach the Velcro located on the underside of the fly around the poles (Figure I).
13) Attach the bungee cords to the ring at the bottom of each pole using the hook provided
(Figure K).
14) Stake out cantilevered windows with ropes provided (figure L below)