Giga Tent SW 004W - Manual (Page 2)

ASSEMBLY INSTRUCTIONS
Step 1
1) Attach the long sided wall to the assembled Party Tent canopy by running the Velcro top edge of the wall to the
bottom
edge of the canopy eave (Figure A).
2) Repeat step for the opposite long sided wall.
Step 2
3) Attach the short sided wall to the Party Tent canopy by running the Velcro top edge of the wall to the bottom
edge of the canopy eave. Secondly, Velcro attach both corner edges of the short walls along the corner edges of the
long walls (Figure B).
4) Repeat step for the opposite short sided wall.
Step 3
5) Attach corners of the walls to leg fame by looping the the Velcro straps together. Be sure to attach all the straps of
each wall to the frame (Figure C).
6) Repeat step for all corners of walls.
B A
Attach
Velcro
Attach Velcro Loops to Corner Legs from Inside of Canopy.
Attach
Velcro
C