Giga Tent SHT 009 - Manual (Page 3)

Corner
Extensions INSIDE
INSIDE
Step 2- ATTACHING the CANOPY and SCREEN INSERT
Step 3- EXTRA STABILITY in WINDY CONDITIONS
18) (FIGURE I) In windy conditions use the extra stakes and guylines to add extra stability .
7)
8)
(Figure C)
9) (Figure D)
10)
To add the SCREEN INSERT continue with the Assembly instructions.
11) (Figure E)
(Figure E)
12)
(Figure F)
13) (Figure G)
14) (Figure H)
Drape the canopy over the frame and make sure it is lined up correctly.
Attach the corner extensions to the bottom of the leg pole by inserting the hook sewn to the
inside of the extension into one of the holes in the bottom of the leg.
Attach the Velcro sewn to the inside of the canopy to the Corner hubs .
Stake out the bottom of the canopy by inserting the stake through the loop sewn to the
bottom of the leg extensions. The Canopy can be used alone or you may add the Screen Insert.
Unfold the Screen Insert and attach the center hook to the loop molded into the
Center Hub and continue attaching the hooks to the Gable Hubs and finally the
Corner Hubs.
Insert the Pins found attached to metal rings sewn to the bottom of the 4 corners into the
ends of the Leg poles .
Attach the pole clips to the leg poles .
Stake out the Screen Insert using the metal rings and the stake loops following
the stake placement description at the bottom of the page.
Tent
40
Stake placement
Approx.
48”
C
D
E
F
G
H
I