GIN Fuse User Manual

Page 15

Advertising
background image

15

TIP: If the glider comes up slightly
off-centre, make small corrections by
moving towards the lower side.

TIP: In stronger winds, be prepared
to take a couple of steps towards the
canopy as it inflates and rises.

TIP: Practice ground-handling regularly
to improve your take-off skills!

CAUTION: Groundhandling (especially
on rough surfaces) will accelerate the
ageing process of your wing.

Are you holding the ‘A’ risers and brake handles?
Is the wing arranged in an arc with the leading edge open and into wind?
Is the wind strength and direction suitable?
Is the airspace and visibility clear?

Launching

The Fuse has smooth and progressive inflation characteristics with no tendency to hang back or

shoot forwards.

Forward launch (nil to light winds)

Lean forward positively and guide the ‘A’ risers smoothly upwards in an arc, keeping your

elbows bent and hands at the level of the shoulders. The Fuse will inflate easily—there is no need
to aggressively pull or push the risers. As the glider comes above your head, make sure that the
canopy is correctly inflated, that you are centrally positioned under the glider, and that there are
no knots or tangles in the lines. Check that the airspace and visibility are clear. If everything is in
order, move forward decisively off the take-off.

Reverse launch (light to strong winds)

Take the brakes and turn around to face the wing. Pass one set of risers over your head as you

turn. Make sure the lines are free from knots or tangles. Check that the airspace and visibility are
clear. Gently pull up the glider in an arc with the ‘A’ risers. When the glider is overhead, brake it
gently if necessary, turn around and launch.

Advertising