GIN Fuse - Manual (Page 26)

26
NOTE: concertina packing ensures that
the leading edge is treated carefully,
which will help increase the glider’s life,
performance and launch behaviour.
NOTE: never expose your glider to
extreme heat e.g. in the boot of a car in
summer.
IMPORTANT: Do not attempt to perform
repairs unless you have the knowledge,
experience, materials and tools needed
to do the job properly.
condition by packing your glider concertina style.
Pack your glider so that the plastic rods lie as flat as possible on each another and there is no
unnecessary bending or twisting of the rods. Fasten any straps or bands by pulling gently—do not
overtighten. We recommend the use of the GIN concertina bag. Please ask your dealer for details
or refer to our website.
Cleaning
Remove sand, dirt or small stones from inside the canopy. Use only lukewarm water and a
sponge or soft cloth to clean your glider. Leave your glider to dry naturally in a well-ventilated
area out of direct sunlight. Never use abrasive materials, solvents or detergents.
Storage
Always make sure your glider is completely dry before storage. Do not store your glider for a
prolonged period if it is sandy, salty or if other objects have entered the cells. Store your glider in
a dry place out of direct heat and light and away from chemicals or small animals. If you intend to
store your glider for a long period, we recommend storing it loosely.
Inspections and repairs
The canopy, lines, risers and connections must be inspected before every flight for correct
function and any signs of damage. If, at any time, your glider shows unusual changes in flying
behaviour, have it checked by a qualified professional.
Pay particular attention to the trimmer webbing as this is an area of high wear and tear. The
trimmer webbing should be replaced if worn.
Small holes in the sail, which do not affect a seam, can be repaired with the sticky backed