GMC 2011 Canyon - Manual (Page 170)

Black plate (20,1) GMC Canyon Owner Manual - 2011
7-20 Infotainment System
. Time of day mode displays the
time of day and the ID3 tag
song name.
To change the default on the
display, press the DISPL knob
until you see the desired display,
then press and hold this knob for
2 seconds. The radio produces
one beep and the selected display
is now the default.
INFO (Information): INFO displays
when a current track has ID3 tag
information. Press this button
to display the artist name and
album contained in the tag. INFO
disappears from the display when
the information in the ID3 tag has
finished being read.
BAND: Press this button to listen to
the radio when a CD is playing. The
inactive CD remains inside the radio
for future listening.
CD AUX (Auxiliary): Press this
button to play a CD when listening
to the radio. The CD symbol
illuminates on the display when a
CD is loaded.
Z (Eject): Press this button
to eject a CD. Eject can activate
while either the ignition or radio is
off. CDs can be loaded with the
ignition and radio off if this button is
pressed first.
CD Messages
CHECK CD: If this message
displays and/or the CD comes out,
it could be for one of the following
reasons:
. It is very hot. When the
temperature returns to normal,
the CD should play.
. You are driving on a very rough
road. When the road becomes
smoother, the CD should play.
. The CD is dirty, scratched, wet,
or upside down.
. The air is very humid. If so, wait
about an hour and try again.
. The format of the CD might not
be compatible. See “Using an
MP3” later in this section.
. There could have been a
problem while burning the CD.
. The label could be caught in the
CD player.
If the CD is not playing correctly,
for any other reason, try a known
good CD.
If any error occurs repeatedly or
if an error cannot be corrected,
contact your dealer. If the radio
displays an error message, write it
down and provide it to your dealer
when reporting the problem.