GMC 2011 Canyon - Manual (Page 333)

Black plate (81,1) GMC Canyon Owner Manual - 2011
Vehicle Care 10-81
Front Position
Rear Position
11. Turn the wheel wrench
counterclockwise to lower
the vehicle. Lower the jack
completely.
{
WARNING
Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
nuts. See Capacities and
Specifications on page 12‑2 for
original equipment wheel nut
torque specifications.
Notice: Improperly tightened
wheel nuts can lead to brake
pulsation and rotor damage. To
avoid expensive brake repairs,
evenly tighten the wheel nuts in
the proper sequence and to the
proper torque specification. See
Capacities and Specifications on
page 12‑2 for the wheel nut
torque specification.
12. Tighten the wheel nuts firmly
in a crisscross sequence as
shown by turning the wheel
wrench clockwise.