GMC 2011 Canyon - Manual (Page 99)

Black plate (55,1) GMC Canyon Owner Manual - 2011
Seats and Restraints 3-55
{
WARNING
Children can be seriously injured
or strangled if a shoulder belt is
wrapped around their neck and
the safety belt continues to
tighten. Buckle any unused safety
belts behind the child restraint so
children cannot reach them. Pull
the shoulder belt all the way out
of the retractor to set the lock,
if your vehicle has one, after the
child restraint has been installed.
Notice: Do not let the LATCH
attachments rub against the
vehicle’s safety belts. This may
damage these parts. If necessary,
move buckled safety belts to
avoid rubbing the LATCH
attachments.
Do not fold the empty rear seat
with a safety belt buckled. This
could damage the safety belt or
the seat. Unbuckle and return the
safety belt to its stowed position,
before folding the seat.
Crew Cab — Rear Seat
1. Put the child restraint on
the seat.
2. If the child restraint
manufacturer's instructions
recommends that the top tether
be attached, attach the top
tether to the top tether
anchor (A). Refer to the child
restraint instructions and the
following steps:
2.1. Pull the seatback forward
to access the top tether
anchors (A). See Rear
Seats (Extended Cab) on
page 3‑10 or Rear Seats
(Crew Cab) on page 3‑10.
2.2. Route the top tether
according to your child
restraint instructions and
the following instructions:
If the position you are using
has a fixed headrest or
head restraint and you are
using a single tether, route
the tether over the head
restraint.