Turn signal/multifunction lever, Turn and lane-change signals – GMC 2009 Savana User Manual

Page 125

Advertising
background image

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

G

: Turn and Lane Change Signals.

5 3

: Headlamp High/Low-Beam Changer.

N

: Windshield Wipers.

L

: Windshield Washer.

Flash-to-Pass Feature.

Information for these features is on the pages following.

Turn and Lane-Change Signals

G

: An arrow on the instrument panel cluster flashes

in the direction of the turn or lane change.

To signal a turn, move the lever all the way up or down.

To signal a lane change, raise or lower the lever until
the arrow starts to flash. The turn signal automatically
flashes three times and if the tow-haul mode is active it
flashes six times. Holding the turn signal lever for
more than one second causes the turn signals to flash
continually until the lever is released.

The lever returns to its starting position when released.

If after signaling a turn or lane change the arrow
flashes rapidly or does not come on, a signal bulb may
be burned out.

Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses and Circuit Breakers on
page 5-104
.

Turn Signal On Chime

If the turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime sounds at each flash of the turn signal
and the message TURN SIGNAL ON also appears in
the Driver Information Center (DIC). See DIC Warnings
and Messages
on page 3-48. To turn off the chime
and message, move the turn signal lever to the
off position.

3-7

Advertising