Trip/fuel menu items 3 – GMC 2009 Savana User Manual

Page 160

Advertising
background image

T

(Vehicle Information): Press this button to display

the oil life, units, tire pressure readings for vehicles
with the Tire Pressure Monitor System (TPMS), engine
hours, Tire Pressure Monitor System (TPMS)
programming for vehicles with the TPMS and without a
Remote Keyless Entry (RKE) transmitter, compass
zone and compass calibration on vehicles with
this feature, and RKE transmitter programming.

U

(Customization): Press this button to customize the

feature settings on your vehicle. See DIC Vehicle
Customization
on page 3-57 for more information.

V

(Set/Reset): Press this button to set or reset certain

functions and to turn off or acknowledge messages
on the DIC.

Trip/Fuel Menu Items

3

(Trip/Fuel): Press this button to scroll through the

following menu items:

Odometer

Press the trip/fuel button until XX mi (Km) displays.
This display shows the distance the vehicle has been
driven in either miles (mi) or kilometers (km).

Trip Odometers

Press the trip/fuel button until A or B displays. This
display shows the current distance traveled in either
miles (mi) or kilometers (km) since the last reset for each
trip odometer. Both trip odometers can be used at the
same time.

Each trip odometer can be reset to zero separately by
pressing the set/reset button while the desired trip
odometer is displayed.

The trip odometer has a feature called the retro-active
reset. This can be used to set the trip odometer to
the number of miles (kilometers) driven since the ignition
was last turned on. This can be used if the trip
odometer is not reset at the beginning of the trip.

To use the retro-active reset feature, press and hold the
set/reset button for at least four seconds. The trip
odometer will display the number of miles (mi) or
kilometers (km) driven since the ignition was last turned
on and the vehicle was moving. Once the vehicle begins
moving, the trip odometer will accumulate mileage. For
example, if the vehicle was driven 5 miles (8 km) before it
is started again, and then the retro-active reset feature is
activated, the display will show 5 miles (8 km). As the
vehicle begins moving, the display will then increase to
5.1 miles (8.2 km), 5.2 miles (8.4 km), etc.

3-42

Advertising