Programming transmitters to the vehicle, Battery replacement – GMC 2009 Savana User Manual

Page 89

Advertising
background image

Programming Transmitters to the
Vehicle

Only RKE transmitters programmed to the vehicle will
work. If a transmitter is lost or stolen, a replacement can
be purchased and programmed through your dealer/
retailer. When the replacement transmitter is
programmed to the vehicle, all remaining transmitters
must also be programmed. Any lost or stolen transmitters
no longer work once the new transmitter is programmed.
Each vehicle can have up to four transmitters
programmed to it. See “Relearn Remote Key” under DIC
Operation and Displays
on page 3-41 for instructions on
how to match RKE transmitters to your vehicle.

Battery Replacement

Replace the battery if the REPLACE BATTERY IN
REMOTE KEY message displays in the DIC. See
“REPLACE BATTERY IN REMOTE KEY” under DIC
Warnings and Messages
on page 3-48 for additional
information.

Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static
from your body could damage the transmitter.

To replace the battery:

1. Separate the transmitter with a flat, thin object

inserted into the notch on the side of the
transmitter.

2. Remove the old battery. Do not use a metal object.

3. Insert the new battery, positive side facing down.

Replace with a CR2032 or equivalent battery.

4. Snap the transmitter back together.

2-5

Advertising