GME TX3345 User Manual
Page 20
Mounting the cradle
The mounting bracket can be oriented with the arms
extending either forward or backwards to adjust the
position of the front panel with reference to the mounting
point
Fitting the radio
Fit radio into cradle and tighten gimbal knobs.
Once the orientation of your radio is confirmed, you can
fit the GME model label. Simply remove the backing tape
and press into the recess on the front panel.
Fitting the microphone
The microphone uses an 8 pin plug and socket.
To fit the microphone:
1. Position the microphone plug so the plastic tab faces
downwards, and press the plug into the socket until
it ‘clicks’.
2. Gently slide the rubber boat towards the hole
surrounding the socket until it is flush with the front
panel.
Plastic tab
Label
PA G E 2 0
I N S T R U C T I O N M A N UA L
T X 3 3 4 5
46397-2_TX3345_InsMan.indd 20
11/09/13 12:04 PM