GME TX3345 - Manual (Page 7)

MENU
The Menu provides a convenient way to customise your
radios settings. The following Menu options are available
.
MENU
ITEM
FUNCTION AVAILABLE
SETTINGS
SQL Adjust Squelch Level SQL--1 TO SQL--9
CTCSS Set CTCSS or DCS Code CTCOF
CTC01 -> CTC50
DC001 -> DC104
LIGHT Adjust Display Brightness See Display
COLOR Adjust Display Colour See Display
WHITE Adjust Colour Saturation See Display
S-METER/
BATT
Display S-Meter or Battery
Voltage on the LCD
S-MET / BATT
BEEP Adjust Key Beep-Tone
Volume
VOL--0 ->
VOL--9
DVC Activate/ Deactivate the
Dynamic Volume Control
DVCOF / DVCON
To use the Menu
Press and hold the MENU
F
key until the radio beeps. ‘SQL’
will be displayed indicating the first Menu item (Squelch
setting mode) is selected.
Briefly press the MENU
F
key to cycle through the Menu items.
Press the or keys to adjust the selected Menu
item.
When finished, press and hold the MENU
F
key to exit the
Menu or wait until the Menu times out.
To adjust the Squelch sensitivity from the Menu
1. Press and hold the MENU
F
key for several seconds. The
radio will enter Menu mode and ‘SQL’ will be displayed.
2. Press the or keys to adjust the Squelch value.
3. When your adjustment is complete, briefly press the
MENU
F
key to return to normal operation.
BACKLIGHTING
The Liquid Crystal Display and keys are backlit for easy
viewing at night. The backlight remains on while the radio
is switched on. The backlighting brightness, colour and
saturation are all fully adjustable for personal preference.
To adjust the Backlighting:
1. Press and hold the MENU
F
key for several seconds. The
radio will enter Menu mode and ‘SQL’ will be displayed.
2. Press the MENU
F
key repeatedly until ‘LIGHT’ is displayed.
3. Press the or keys to adjust the backlight
brightness.
4. Press the MENU
F
key briefly. ‘COLOR’ is displayed.
5. Press the or keys to adjust the backlight
colour. The full spectrum of colours is available.
6. Press the MENU
F
key briefly. ‘WHITE’ is displayed.
7. Press the or keys to adjust the whiteness or
colour saturation of the selected backlight colour from
full colour to white (no colour).
8. To exit, press and hold the MENU
F
key or wait for the
Menu to time out.
TIP: For the deepest colour range, reduce the WHITE
setting.
KEY BEEPS
The key beeps act as confirmation of your key presses.
You can adjust the volume level of the beeps as follows.
1. Press and hold the MENU
F
key for several seconds. The
radio will enter Menu mode.
2. Press the MENU
F
key repeatedly until ‘BEEP’ is displayed.
3. Press the or keys to adjust the beep volume
from 0 (silent) to 9 (loud).
4. To exit, press and hold the MENU
F
key or wait for the
Menu to time out.
T X 3 3 4 5 I N S T R U C T I O N M A N UA L PA G E 7
46397-2_TX3345_InsMan.indd 7 11/09/13 12:04 PM