Grant Instruments PCV-3000 - Manual (Page 5)

Page 5
Multi-spin PCV-3000
Operating Instructions
To turn off the unit, disconnect the external power supply from the mains outlet.
If liquid is spilt inside the unit, disconnect it from the external power supply and have it checked by a competent
person.
DURING OPERATION
Do not use rotors with visible signs of corrosion, wear or mechanical damage.
Do not fill in the tubes after they are inserted in the rotor.
Do not operate the unit in environments with aggressive or explosive chemical mixtures.
For indoor use only.
Do not place a load exceeding 0.2 kg on PCV-3000.
Do not switch on the unit with the upper lid of the body removed.
Do not use outside laboratory rooms.
Do not operate the unit if it is faulty or been incorrectly installed.
Do not make modifications to the design of the unit.
BIOLOGICAL SAFETY
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or inside
the equipment.
Although the PCV-3000 can be programmed for unattended use, we advise that the unit should be supervised
during operation.
When siting the PCV-3000 in the laboratory ensure that the unit is level and will not slide once in operation.
Version 2.02 - August 2012