Getting started – Grant Instruments PCV-3000 User Manual
Page 8
Page 8
Multi-spin PCV-3000
Operating Instructions
3. Getting started
3.1
Unpacking
Remove packing materials carefully, and retain for future shipment or storage of the unit.
3.2
set includes:
• Centrifuge/Vortexer Multi-spin PCV-3000 ....................................................... 1
•
•
•
•
•
•
•
•
Complete set. The unit
Standard set:
pce.
External power supply ......................................................................................1 pce.
Rotor fixation pin...............................................................................................1 pce.
rotor 18091 u
...................................................................................................1 pce.
rotor 18092 v
...................................................................................................1 pce.
Operating Instructions; Declaration of Conformity ...........................................1 copy
Optional accessories:
rotor R2-05 w
............................................................................................on request
rotor R2-05-02 x
.......................................................................................on request
rotor PSR-16 y
.........................................................................................on request
3.3
Set up:
-
place the unit on the horizontal even working surface;
-
plug the external power supply unit into the 12 V socket at the rear side of the unit.
-
it is necessary to observe the safety area of 300 mm around the unit in accordance
with EN-61010-2-20. Persons and hazardous materials must not be located in the
safety area whilst the centrifuge is in operation.
Version 2.02 - August 2012