Grant Instruments Labwise - Manual (Page 13)

30853(1) Page 13 May 2012
3.6. Logging setup
The data logging settings can be changed by selecting Logging from the Setup option on
the main control window menu. The log file directory and logging interval are user
configurable.
There are three options for the log file name configuration depending on test requirements:
 Prompt the for a filename when the logging is started
 Generate a log file name automatically based on a date and time
 Generate a log file name based on a user defined prefix and an incremental number
3.7. COM setup
The COM port assigned to the Optima can be changed by selecting COM from the Setup
option on the main control window menu.
This option can be used to configure the COM port:
 If an Optima is connected after Labwise is launched
 If the comms cable is moved to a different port
 If moving between different Optima units connected to the PC
It is possible to have multiple Optima units connected to a PC BUT Labwise is only
able to monitor one device at a time.