Grant Instruments Labwise - Manual (Page 8)

May 2012 Page 8 30853(1)
2.6. Installing Optima USB drivers (Windows XP)
The Labwise installation process must be completed prior to attempting to install the USB
drivers.
Drivers should be installed automatically the first time an Optima is connected via USB to a
PC. If this does not happen then the drivers can be installed manually using the following
method (Windows XP).
1. Connect a TX150 or TXF200 to a free USB port on the PC.
The Found New Hardware wizard should start
2. Select Install from a list or specific location (Advanced) and click Next.
3. Select Include this location in the search and browse to
“C:\Labwise\CDM20814_WHQL_Certified”. Click Next.
4. The driver will install. Click Finish to complete. The Optima should now be ready to use.