Great Planes Triton EQ Charger - GPMM3155 - Manual (Page 4)

4
CHARGER CONTROLS AND OUTPUT CONNECTIONS
BATT TYPE button: To change battery type, move to the
right through all menus, and to fi nd the data screens.
INC button: To increase values on-screen and move
upwards through menus.
DEC button: To decrease values on-screen and move
downward through menus.
ENTER/START button: To confi rm settings, and to start and
manually stop functions.
Lithium Balancing Jack: To connect an adapter for balancing of
LiPo batteries. See page 10.
Banana Jacks: Main output for charging, discharging, and cycling.
For best performance it’s recommended to use pre-assembled leads
to connect batteries to the charger. Always connect the charge lead
to the charger FIRST. Then connect the battery to the charge lead.
Always match polarities from the battery’s lead to the banana jacks
(red positive (+) lead to red banana jack, black negative (-) lead to
the black banana jack).
WARNING! NEVER allow the positive and negative output connections to touch while a battery is
connected to the output. Failure to do so could result in permanent damage to the battery and/or the
charger and void your warranty.
Great Planes offers a large variety of charge leads which can be found at most hobby retailers nationwide:
Part Number Description
GPMM3105 charge lead – banana plug to 2-pin connector
GPMM3148 charge lead – banana plugs to Deans ® Ultra ® male
GPMM3149 charge lead – banana plugs to Deans ® micro
GPMM3200 Balancing lead – 1-6S ElectriFly LiPos
GPMM3201 Balancing lead – 1-6S FlightPower, Thunder Power LiPos
HCAP0101 Futaba J Tx and Rx charge leads, except 9VAP
HCAP0102 Futaba J Tx and Rx charge leads, 9VAP only
HCAP0104 Airtronics/Sanwa Tx and Rx charge leads
HCAP0105 JR/Spektrum Tx and Rx charge leads
HCAP0106 Hitec Tx and Rx charge leads
HCAP0108 Charge leads, banana plugs to alligator clips
HCAP0110 9V-style Tx connector, Futaba-J Rx charge lead
HCAP0310 Banana Plugs (3 pair)
HCAP0320 Heavy Duty Banana Plugs (2 pair)