Installing the motor and radio gear – Great Planes Yak-54 3D Indoor EP ARF - GPMA1131 User Manual

Page 16

Advertising
background image

16

INSTALLING THE MOTOR

AND RADIO GEAR

o 

1. Glue the horizontal and vertical fuselage doublers

to the underside of the horizontal and vertical fuselage
as shown.

o 

2. Glue the upper horizontal fuselage doubler to either

side of the upper horizontal fuselage as shown.

o 

3. This is a good time to reinforce the motor mount by

adding some glue around the edges, and to the front of the
ABS motor mount.

o 

4. Locate the 1/8" x 3/64" x 1" [3 x 1 x 24.5mm] flat, carbon

tail skid and glue it into the slit on the underside of the tail,
as shown.

Advertising