Compatible Systems INTRAPORT 2+ - Manual (Page 31)

Chapter 6 - Basic Configuration Guide 25
4. Set an IP Gateway for Ethernet 0.
IP Static Routes
To access the IP Static Routes dialog box, select IP Static Routes under
Global in the Device View.
A. Click the Add... button. The Static Route dialog box will
appear:
Dual Ethernet Static Route Single Ethernet Static Route
B. Click the IP Address radio button in the Gateway section.
For dual Ethernet setups, enter the internal TCP/IP address of
your firewall or proxy, whichever is applicable.
For single Ethernet setups, enter the internal TCP/IP address
of your upstream Internet access/firewalling router.
In either case, this address must be on the same TCP/IP net-
work as the Ethernet 0 address of the IntraPort 2/2+.