Compatible Systems INTRAPORT 2+ - Manual (Page 56)

50 Chapter 7 - Alternate Protocols and Security Parameters
Chapter 7 - Alternate Protocols
and Security Parameters
This chapter briefly discusses the configuration of the IntraPort 2/2+
VPN Access Server for AppleTalk and IPX, and with RADIUS and
SecurID authentication servers.
Detailed information on configuring the server to work with these
protocols and servers is provided in the CompatiView Management
Software Reference Guide and the Text-Based Configuration and
Command Line Management Reference Guide. You should use this
list as a starting point to look up more specific information in the other
documents.
v Note: Refer to the VPN Client Reference Guide for information on
the installation and operation of the VPN Client software
In this chapter:
CV = Parameters configured using CompatiView management
software
TB = Parameters configured using Text-Based or Command Line
Management
IPX Protocol
Required for IPX
Generally, there are no required changes from the shipping Ethernet
configuration for IPX. The Ethernet interface will autoconfigure to use
the two most common IPX frame types, and will automatically adapt to
conditions on the Ethernet.
Suggested for IPX
You may want to set your own network numbers, rather than using the
autoconfigured values. You may also want to turn off unused frame
types.
CV: Use the IPX Routing: Ethernet 0 dialog box.
TB: Use configure and set keywords in the IPX Ethernet 0 section.