Heli-Max HMXE0839 - Manual (Page 12)

12
Turn the Transmitter On
Verify that the HOLD/FLAP and UP-1/GEAR functions are off and slide the
power switch up to turn the transmitter on. If the transmitter is turned on with
the HOLD/FLAP, UP-1/GEAR or throttle stick forward, the screen will show
“3D” or “T-H” and a warning will sound. Turn the HOLD/FLAP and UP-1/GEAR
functions off and/or move the throttle stick to the low position to continue. Now
is a good time to make sure the electronic trim buttons on the transmitter are
centered. We do not need to use them as the Incredible Heli-Max TAGS system
controls all fl ight center trims.
Install the Flight Battery
Slide the front portion of the
canopy forward to expose the
battery compartment.
Slide the battery into the
helicopter. Make sure the
battery is slid all the way into
the battery tray.