Heli-Max HMXR4854 - Manual (Page 6)

®
BATTERY REPLACEMENT BATTERY REPLACEMENT
Remove battery compartment cover.
Remove discharged batteries.
Install (2) replacement CR2032 batteries. Please note that the
positive side of each battery should be on top.
Replace the battery compartment cover.
The gauge does not need re-calibration after the batteries have
been replaced.
®
STORAGE STORAGE
If the gauge is not going to be used for a long time period, please
remove the batteries to prevent damage to the contacts.
®
SPECIFICATIONS SPECIFICATIONS
Operating Voltage: 3. 9~6VDC
Sleep Current: < 7uA
Low Voltage Protection: 4V±0.05
Detectable Pitch Range: -90° ~ 0 ~ +90° (Screen flashes warning)
Blade Chord Range: 15mm to 65mm
Current Consumption: < 4mA
Resolution: 0.1°