Heli-Max HMXE0801 - Manual (Page 4)

PITCH RANGE
Using a pitch gauge please verify the settings shown below.
GYRO SET UP
With the transmitter on and the fl ight battery connected, pick
the helicopter up by the main rotor head and rotate the nose
to the left (counterclockwise). Verify that the pitch slider on
the tail rotor moves in toward the tail gear box, applying right
tail rotor as the correction.
You may notice that the tail servo does not center when the
transmitter stick is returned to center. This is correct and how
a heading hold gyro operates. If the tail rotor servo always
returns to center, then you need to reverse the gyro gain
channel in the transmitter.
BEFORE FLYING THE MODEL
Once you have verifi ed the settings, please refer to the Axe 400
Ready To Fly manual for fi nal set up and fl ying instructions.
Thanks you for purchasing the Heli-Max Axe 400 Rx-R
and Happy Flying!
Low End
-2°
-4°
-10°
Mid Stick
0°
0°
0°
High End
+10°
+10°
+10°
Pitch Curve
Normal
Hold
Idle Up 1
Entire Contents © Copyright 2008 HMXE0801MNL01