Region setting – HONDA 2015 Crosstour - Owner's Manual User Manual

Page 168

Advertising
background image

167

uu

Audio System

u

Region Setting

*

Features

Region Setting

*

The audio system’s region setting will be lost when the battery is disconnected or
goes dead.

If the Region Select screen appears, you need to set the region for the audio
system. Follow the steps below:
1. Press

to

select

OK.

2. Rotate

to select the region you live in, then press

.

3. You will receive a confirmation message on the screen. Rotate

to select Yes,

then press

.

1

Region Setting

*

The region setting is required only when the battery
power is temporarily disconnected. It has been
usually set to your vehicle’s region type beforehand.

You cannot change the setting once you have
completed the setting procedure. Contact a dealer if
you selected an incorrect region.

These indications are used to show how to operate
the MENU/SEL (Selector) knob or the interface dial.
Rotate

to

select.

Press

to enter.

* Not available on all models

15 CROSSTOUR-31TP66500.book 167 ページ 2014年7月31日 木曜日 午後3時23分

Advertising