HONDA 2015 Crosstour - Owner's Manual - Manual (Page 531)

530
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
15 CROSSTOUR-31TP66500.book 530 ページ ２０１４年７月３１日 木曜日 午後３時２３分