HONDA 2015 Crosstour - Owner's Manual User Manual
Page 79
78
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Smart Entry
System Indicator
*
●
Comes on for a few seconds when you
change the power mode to ON, then goes
off.
●
Comes on as soon as a problem is detected
in the smart entry system or push button
starting system.
●
Have your vehicle checked by a dealer.
Starter System
Indicator
*
●
Comes on for a few seconds when you set
the power mode to ON, then goes off.
●
Comes on if the starter system has a
problem.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for 15 seconds while pressing
the brake pedal and manually start the engine. Have
the vehicle checked by a dealer.
Turn Signal and
Hazard Warning
Indicators
●
Blinks when you operate the turn signal
lever.
●
Blink if you press the hazard warning button.
●
Does not blink or blinks rapidly - A turn signal
light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 489, 490
U.S.
Canada
* Not available on all models
15 CROSSTOUR-31TP66500.book 78 ページ ２０１４年７月３１日 木曜日 午後３時２３分