HONDA 2015 CR-Z - Owner's Manual - Manual (Page 255)

254
uu Checking and Maintaining Wiper Blades u Changing the Rear Wiper Blade Rubber
Main
tenan
ce
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
2. Slide the wiper blade out from the wiper
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder by
pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.
1 Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm; it may damage the
rear window.
Tabbed End
15 CR-Z-31SZT6400.book 254 ページ ２０１４年８月１日 金曜日 午後１時５９分