HONDA 2015 CR-Z - Owner's Manual - Manual (Page 293)

292
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
15 CR-Z-31SZT6400.book 292 ページ ２０１４年８月１日 金曜日 午後１時５９分