Canon A2000 IS - Manual (Page 113)

Designating Images for Printing (DPOF)
113
Selecting Images
Select [Select Images & Qty.].
● Press the · button, select the 2 tab.
Press the
op buttons to select [Select
Images & Qty.], then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press the
m button.
X You will be able to set the number of print
copies.
● If you select [Index], appears on the
screen.
Set the number of prints.
● Press the op buttons to set the number
of prints (maximum 99).
● Repeat Steps 2 and 3 to set other images
and the number of prints.
● For [Index], you cannot set the number of
prints. Only select images.
Set All Images to Print One Each
Select [Select All Images].
● Press the · button, select the 2 tab.
Press the
op buttons to select [Select
All Images], then press the m button.