Canon A2000 IS - Manual (Page 52)

Changing the Image Display Time
52
Adjust the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
Images display for approximately 2 seconds after being shot. You can
change the length of time the images display.
Display the menu.
● Press the · button.
Select [Review].
● Press the qr buttons to select the 4 tab.
● Press the op buttons to select [Review],
then press the qr buttons to select the
display time.
● If you select [Off], the image will not
display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
Changing the Image Display Time