HONDA 2011 CR-Z - Owner's Manual - Manual (Page 257)

256
Maintenance
Maintenance Under the Hood Brake/Clutch Fluid
Brake/Clutch Fluid
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
Use the same fluid for both the brakes and clutch.
Checking the Brake Fluid ■
The fluid level should be between the MIN and
MAX marks on the side of the reservoir.
Checking the Clutch Fluid ■
The fluid level should be between the MIN and
MAX marks on the side of the reservoir.
Brake/Clutch Fluid
If the specified brake fluid is not available, you
should use only DOT 3 or DOT 4 fluid from a sealed
container as a temporary replacement.
Using any non-Honda brake fluid can cause
corrosion and decrease the longevity of the system.
Have the brake system flushed and refilled with
Honda Heavy Duty Brake Fluid DOT 3 as soon as
possible.
NOTICE
Brake fluid marked DOT 5 is not compatible with
your vehicle's braking system and can cause
extensive damage.
If the brake fluid level is at or below the MIN mark,
have the system inspected for leaks or worn brake
pads by a dealer.
Brake Reservoir
MIN
MAX
Checking the Clutch Fluid
If the clutch fluid level is at or below the MIN mark,
have the system inspected for leaks or a worn
clutch plate by a dealer.
Clutch Reservoir
MIN
MAX
31SZT600book.indb 256 2010/04/28 13:43:56
Home
Index
TOC
QRG
2011 CR-Z