HONDA 2011 CR-Z - Owner's Manual - Manual (Page 259)

258
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60W (HB3)
Low beam headlight: 55W (H11 for halogen bulb type)
35W (D4S for high voltage discharge)
High Beam Headlight ■
1. Remove the cover.
2. Remove the coupler.
It can be removed by pushing the tab.
Rotate the old bulb to the left to remove. 3.
Insert a new bulb into the headlight 4.
assembly and turn it to the right.
Insert the coupler into the connector of the
5.
bulb.
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can
cause the bulb to overheat and shatter.
NOTICE
The headlight aim is set by the factory, and
typically does not need to be adjusted. However, if
you regularly carry heavy items in the cargo area,
have the aiming readjusted by a dealer or another
qualified technician.
The HB3 and H11 types are halogen bulbs.
When replacing a bulb, handle it by its base, and
protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights’ inside lenses (headlights, brake
lights, etc.) may fog temporarily after a vehicle
wash or while driving in the rain. This does not
impact the exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by a dealer.
Cover
Bulb
Tab
Coupler
31SZT600book.indb 258 2010/04/28 13:43:58
Home
Index
TOC
QRG
2011 CR-Z