HONDA 2011 CR-Z - Owner's Manual - Manual (Page 268)

267
Maintenance
Checking and Maintaining Wiper Blades Changing the Front Wiper Blade Rubber
4. Slide the wiper blade out from its holder
by pulling the tabbed end out.
5. Remove the retainer from the rubber blade
that has been removed, and mount it to a
new rubber blade.
Correctly align the rubber protrusion
and the retainer groove.
6. Slide the new wiper blade onto the holder
from the bottom end.
The tab on the blade should fit in the
indent of the wiper blade.
Slide the wiper blade onto the wiper arm, 7.
then push down the lock tab.
Lower the passenger side wiper arm first,
8.
then the driver side.
Blade
31SZT600book.indb 267 2010/04/28 13:44:06
Home
Index
TOC
QRG
2011 CR-Z