HONDA 2010 Accord Crosstour - Owner's Manual - Manual (Page 360)

CONTINUED
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder. Make sure the three rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
3.
4.
Wiper Blades
Ma
int
e
na
nce
357
BLADE
BLADE REINFORCEMENT
TOP
09/09/29 17:53:26 31TP6600_362
2010 Accord Crosstour