HONDA 2010 Accord Crosstour - Owner's Manual - Manual (Page 376)

CONTINUED
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes. Open the tailgate. Pull up the
handle on the cargo area floor lid.
Then remove the hook, and hook
it to the hole on the cargo side
panel (see page
).
The tools and jack are under the
cargo area behind a cargo box.
Remove the cargo box by lifting it
up with the handle (see page
).
Take the jack, tools and the bag
out of the tool kit case.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
If you are towing a trailer, unhitch
it.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
5.
4.
3.
2.
1.
120
121
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
373
HOOK CARGO AREA
FLOOR LID
JACK SPARE TIRE TOOLS
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
09/09/29 17:55:55 31TP6600_378
2010 Accord Crosstour