HONDA 2007 Accord Hybrid - Owner's Manual - Manual (Page 221)

Open the trunk. Carefully bend back the corner of
the trunk lid trim to expose the
bulbs.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
Test the light.
Push the trunk lid trim back into
position.
Press the trim clips back into their
holes.
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
1. 3.
2.
4.
5.
6.
7.
8.
Replacing Back-up Light Bulbs
Lights
218
TRIM CLIPS BULB
SOCKET SOCKET BULB
06/08/08 14:51:35 31SDR620_223
Main Menu Table of Contents s t Main Menu ▲ ▼ Main Menu ▲ ▼ Table of Contents