HONDA 2007 Accord Hybrid - Owner's Manual - Manual (Page 239)

Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. Loosen the wheel nuts 1/2 of a
turn with the wheel wrench. 8.
9.
7. 6.
Changing a Flat Tire
236
EXTENSION
WHEEL WRENCH JACKING POINT
WHEEL NUT
WHEEL NUT WRENCH
06/08/08 14:54:09 31SDR620_241
Main Menu Table of Contents s t Main Menu ▲ ▼ Main Menu ▲ ▼ Table of Contents