HONDA 2006 Accord Hybrid - Owner's Manual - Manual (Page 114)

You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars or
icons.
Use the TUNE bar or
knob to tune the radio to a desired
frequency. Press the
side of the
bar or turn the knob to the right to
tune to a higher frequency, and the
side or turn the knob to the left
to tune to a lower frequency.
The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
or side of the
bar, then release it.
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Turn the system on by
pushing the PWR/VOL knob or the
FM/AM button. Adjust the volume
by turning the PWR/VOL knob.
Pushing the AUDIO DISPLAY
button will also turn on the system.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the FM/AM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
XM satellite radio information is
available on page
.
The audio system for your vehicle
can also be operated using the voice
control system. See Navigation
section in your Quick Start Guide for
an overview of this system and the
Navigation System manual for
complete details.
131
For vehicles with Navigation System
Only on models equipped with
Navigation System
To Select a Station
TUNE
SEEK
To Play the Radio Voice Control System
Playing the AM/FM Radio
Fe
a
tu
re
s
113
Main Menu Table of Contents