HONDA 2006 Accord Hybrid - Owner's Manual - Manual (Page 211)

Open the trunk.
Remove the holding clips from the
lining by using a flat-tipped
screwdriver.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the new bulb to make sure it
works.
Set the lining back.
2.
1.
4.
3.
5.
6.
Replacing Rear Turn Signal Light
Bulbs
Lights
210
HOLDING CLIPS BULB
SOCKET
Main Menu Table of Contents