HONDA 2006 Accord Hybrid - Owner's Manual - Manual (Page 208)

Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector onto
the bulb.
Turn on the headlights to test the
new bulb.
Open the hood. To change a bulb
on the driver’s side, undo the two
fasteners and remove the air
intake cover.
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
1. 3.
2.
4.
5.
6.
7.
High Beam Headlight
Lights
Ma
int
e
na
nce
207
AIR INTAKE
COVER
FASTENERS TAB
BULB
Main Menu Table of Contents