Installing a child seat – HONDA 2006 Ridgeline - Owner's Manual User Manual
Page 47
![background image](/manuals/678884/47/background.png)
When using the tether anchor,
always hook the tether strap through
the upper guide to route it properly.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Each outer seating position has the
tether anchor at the outside of the
seat bottom. The center seating
position has the tether anchor
between the lower anchors for the
LATCH-compatible child seat. Each
anchor point is shown above.
A child seat with a tether can be
installed in any seating position in
the rear seat.
Lift the cover, then hook the
tether strap through the upper
guide as shown.
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
1.
2.
Installing a Child Seat
Installing a Child Seat with a
Tether
Using an Outer Tether Anchor
44
COVER
UPPER
GUIDE
UPPER GUIDE
CENTER
TETHER
ANCHOR
OUTER
TETHER
ANCHOR
OUTER TETHER ANCHOR
Main Menu
Table of Contents